Three different faults get described as bad double glazing, and they need three different answers. Fog between the panes is a failed seal. A draught is usually a worn gasket or hardware. A frame that is warped or rotten is beyond a quick fix. Work out which you have before anyone quotes.
Triage by symptom
What each symptom usually means
| Symptom | Likely cause | Usual fix |
|---|---|---|
| Fog or droplets between the panes | Failed sealed unit | New unit in the existing frame |
| Cold air along a closed sash | Perished gasket, dropped sash or worn hinge | New gaskets and hardware |
| Handle loose or locks not engaging | Worn gearing or frame out of true | New hardware, or window if the frame has moved |
| Yellow, powdery or split uPVC | Old, weathered frame | Replace the window |
| Soft or rotten timber | Water getting into the frame | Repair if small, replace if widespread |
| Moisture on the inner surface only | Humidity or poor ventilation | Ventilate, don't replace |
When a new unit is enough
- The frame is straight, the corners are tight and the hinges work.
- Only some panes have failed and the rest of the house looks tired but not broken.
- You want to spread the spend. A unit swap is the cheapest way to buy time, typically £150–£500 for one or two units.
- The frame is a good-quality profile that you're happy with and that the beads can be removed from without damage.
This is the territory of double glazing replacement: the installer takes the beads off one window, measures the unit and orders a made-to-measure replacement. Modern units usually have low-emissivity glass and warm-edge spacers, so the new pane often performs better than the old one even in the same frame.
When the whole window should go
- Most panes are failing at once, which points to a generation of windows reaching the end of its life.
- The frame is cracked, warped or discoloured, or the hinges and locks have lost their grip.
- You want better security or a different layout, such as an extra opener or an escape-sized window.
- The frame is thin and early. Re-glazing a poor frame can be money wasted if the frame itself fails within a few years.
For plain replacement, casement windows are the usual choice. If the house is older and you want the look of timber joinery, flush casement windows cost more but sit level with the frame.
What's different in Staffordshire
In the 1980s and 90s a lot of Staffordshire estates were glazed in a short window of years, which is why seals tend to give up in the same few winters. If your neighbours' windows are fogging, yours probably will too. It's worth getting a quote for the whole house, not just the pane you've noticed, so you can see whether replacing them all would cost far more than repeated unit swaps.
Exposed positions are harder on gaskets. Up on the Moorlands, around Leek and Biddulph, wind-driven rain finds any weakness, and a draught there may be a seal failing before the glass does.
If you can see fog between the panes but the frame closes smoothly and feels solid, ask for a unit-only quote first. If the installer won't quote for a unit swap, that tells you something about their business, not about your window.
Not sure how many windows are affected? Start with the warning signs checklist, then price the options in the double glazing replacement cost guide.
How to decide between a new unit and a new window
- Find the faults
Walk round the house and list each window with fog between the panes, draughts, sticking sashes or damaged frames.
- Check the frame
Look for cracks, warping, soft timber and loose corners. A sound frame can usually keep its hardware.
- Test the hardware
Open every window and try the handles and locks. Note anything that drops or jams.
- Check the beads
Ask the installer whether the beads come off cleanly, because a unit swap depends on it.
- Get two prices
Ask for a quote for units only and for complete windows, and compare cost against remaining life.
Frequently asked questions
Can I replace just the glass in a double glazed window?
Yes. If the frame is sound, a new sealed unit can be fitted into it. That is usually the cheapest route for misted glass.
Why are my double glazed windows misting up?
Fog between the panes means the seal around the sealed unit has failed and moist air has got in. It can't be cleaned out, and the unit needs replacing.
Is it worth re-glazing a 1990s frame?
Sometimes. If the frame is straight and the hardware works, a new unit is a sensible fix. If most windows are failing, new frames may be better value.
How long does a unit swap take?
Typically a few hours for one or two windows, once the new unit has been made, which usually takes one to two weeks.
Ready to talk to a casement windows specialist?
Get Free Quotes →
