Replacing double glazing covers anything from swapping one misted pane to stripping a whole house of 1990s windows. In Staffordshire, double glazing replacement typically runs from about £150 for a sealed unit to £10,000 or more for every window in a three-bedroom house. The first question is whether the frame is worth keeping.
Typical double glazing replacement prices
Typical double glazing replacement costs in Staffordshire, supplied and fitted
| Job size | What it usually covers | Typical cost |
|---|---|---|
| Small | One or two misted sealed units in sound frames | £150–£500 |
| Typical | Several units plus new hinges and locks, or two or three complete windows | £500–£3,000 |
| Large | Replacing every window in a typical three-bedroom house | £3,000–£10,000+ |
The middle band is wide because it mixes two different jobs: patching up a handful of failed units and fitting a few whole windows. Be clear about which one you are asking for, because installers who only fit complete windows may price a unit swap high or decline it.
Unit swap or new window?
- Swap the unit when the frame is straight, the hinges work and the only fault is condensation trapped between the panes.
- Replace the window when the frame is cracked, warped or yellowed, the hardware is failing, or you want better energy performance than the old frame can give.
- Refresh the hardware as well when the units are new but the handles and gaskets are tired. That extends an old frame for a few more years.
- Do the worst elevation first if the whole house is too much at once. Ask for the same system and colour later so the windows match.
Our guide to misted, draughty or failed double glazing walks through that choice window by window.
What moves the price
- Unit size. A small bathroom pane costs far less than a large patio-door unit.
- Glass specification. Low-emissivity coatings and warm-edge spacers are now common, while argon filling, laminated or acoustic glass cost more.
- Number of units. The fitting visit is a fixed cost, so the first unit is the dearest.
- Measuring. Beads must come off a window first to take the exact unit size, and some installers charge for the survey visit.
- Frame condition. A frame that turns out to be damaged once the unit is out can turn a small job into a larger one.
- Access. Upper windows over extensions take longer.
What's different in Staffordshire
Much of the work here is first-generation double glazing, fitted on estates in Burntwood, Tamworth, Cannock and the Potteries suburbs in the 1980s and 90s. Those seals tend to fail together, so the sensible way to price is to check every window in the house, not just the one you've noticed. A clear window next to a foggy one is often a matter of time.
Frames of that age are often thin, and some are no longer worth re-glazing. If most of the house is in that state, a full set of new casement windows may cost less per year of use than repeated unit swaps. The cost calculator will help you compare the two routes.
A like-for-like unit swap in a retained frame normally falls outside window certification. Replacing whole windows is controlled work under the Building Regulations, so ask the installer whether they will register it with a scheme such as FENSA.
Checks before you sign
- Whether the quote is for units only, or for complete windows
- The glass specification on each unit, including safety glass where it is needed low down or beside doors
- Guarantee lengths, and whether the old guarantee on the frames is affected
- Who disposes of the old glass, and whether the frames will be cleaned and checked
Frequently asked questions
How much does it cost to replace double glazing in Staffordshire?
As a guide, one or two sealed units cost about £150–£500, several units or a few complete windows £500–£3,000, and a whole three-bedroom house £3,000–£10,000 or more.
Can I just replace the glass and keep the frame?
Yes, if the frame is sound. That is the cheapest route, and it is common for misted or failed units. The installer needs to measure the exact unit size once the beads are removed.
Why is one misted window dearer per pane than several?
The installer's visit is a fixed cost, so a single pane carries all of it while several share it.
Does replacing sealed units need certification?
A like-for-like unit swap in a retained frame normally does not. Replacing whole windows does, so ask the installer how it will be registered.
Ready to talk to a double glazing replacement specialist?
Get Free Quotes →
